Truck and Bus Wiper Blade Production: Inside Our 40-Inch Workshop Process

Watch Our 40-Inch Truck and Bus Wiper Blade Production

This workshop video provides a direct view of truck and bus wiper blade production for a 40-inch framed front wiper blade. At approximately 1,016 mm long, this blade is intended for large commercial-vehicle applications where the required size, arm connection, and vehicle information should be checked before an order is confirmed.

For importers, distributors, wholesalers, and commercial-vehicle parts buyers, production visibility makes supplier discussions more practical. It shows how a long framed blade moves through component preparation and assembly before packing, while giving buyers a clearer basis for sample approval and bulk-order specifications.

From Components to Finished 40-Inch Wiper Blades

The following workshop images document one production batch. The finished blades are collected together before individual packing, while the close-up images show the long frame, support structure, rubber refill area, and components used during assembly. This visual sequence helps buyers understand the physical structure behind truck and bus wiper blade production.

For a long blade, each order should begin with a confirmed specification rather than size alone. Buyers should provide the target vehicle or market application, blade length, wiper-arm or connector information, expected quantity, packaging requirements, and any private-label instructions. A physical sample or clear technical reference can further reduce compatibility misunderstandings.

Packaging in Truck and Bus Wiper Blade Production

Packaging protects the blade during storage, handling, and international transport, while also supporting the buyer’s sales channel. Color boxes provide a printable surface for branding, product information, barcodes, and installation guidance. Blister-card or transparent blister packaging makes the product more visible for retail display. The final choice depends on blade dimensions, order volume, retail positioning, and shipping requirements.

Because a 40-inch blade is longer than a standard passenger-car replacement blade, the inner pack and export carton should be reviewed together. Buyers can confirm artwork, barcode position, package strength, units per carton, carton markings, and handling expectations during sampling. Early packaging confirmation helps truck and bus wiper blade production proceed with fewer changes after assembly has started.

Quality Management in Truck and Bus Wiper Blade Production

Quality management should cover more than the appearance of the finished blade. Incoming materials, in-process assembly, product dimensions, connector details, wiping-related checks, packaging, and final order records may all require defined inspection points according to the approved specification. The exact inspection plan should be agreed for each project instead of assumed from a general product description.

For repeat orders, approved samples, specifications, packaging artwork, and inspection records create a common reference between buyer and supplier. This is particularly useful when an importer manages several sizes, connectors, brands, or destination markets. Consistent documentation supports clearer communication and more stable repeat-order planning.

What Buyers Should Confirm for Truck and Bus Wiper Blade Production

A 40-inch blade cannot be selected only because its length appears suitable. Commercial vehicles can use different windshield dimensions, arm systems, and mounting arrangements. Before requesting a quotation or sample, buyers should prepare the information that determines whether the proposed blade matches the intended application.

Information to Confirm	Why It Matters
Blade length	Confirms the required 40-inch / 1,016 mm size or another requested length.
Vehicle and market application	Provides context for trucks, buses, coaches, or other commercial vehicles.
Wiper arm and connector	Prevents compatibility decisions based on blade length alone.
Quantity and size mix	Supports production, packing, and quotation planning.
Branding and packaging	Defines artwork, label, barcode, inner-pack, and carton requirements.
Sample and inspection criteria	Creates an agreed reference before mass production.

Buyers comparing a wider range can browse the Lonsign wiper blade catalog or review products in our wiper blade showroom. For a broader supplier-evaluation checklist, see our OEM wiper blade manufacturer buyer’s guide.

OEM and Wholesale Truck and Bus Wiper Blade Production

Importers and distributors may need more than one commercial-vehicle size, packaging style, or brand presentation. A structured inquiry allows the supplier to review product selection, sample requirements, packaging feasibility, and bulk-order planning together. It also makes truck and bus wiper blade production easier to align with the buyer’s sales channel and destination market.

If you are sourcing 40-inch truck wiper blades, bus windshield wiper blades, or other commercial-vehicle replacement products, send the relevant application, dimensions, connector details, quantity, and packaging request through the Lonsign contact page. Our team can then review the project information and prepare an appropriate product and quotation discussion.

More Automotive Accessories from Lonsign

In addition to windshield wiper blades, Lonsign supplies other automotive accessories for importers, distributors, retailers, and private-label projects. Buyers can explore our broader auto accessories showroom, review more than 100 options in the steering wheel cover collection, or learn about best-selling car floor mats for wholesale and retail programs. If you would like to combine wiper blades with steering wheel covers, car floor mats, or other automotive products, please contact our team to discuss product selection, packaging, and sourcing requirements.

Frequently Asked Questions

What vehicles use a 40-inch wiper blade?

A 40-inch blade may be used on certain trucks, buses, coaches, and other large commercial vehicles. Compatibility should be confirmed from the vehicle application, required length, wiper-arm system, connector, and an approved sample or technical reference.

Is the same blade suitable for both trucks and buses?

Not automatically. Trucks and buses can use different arm connections and windshield configurations. Buyers should provide application and connector information instead of relying only on the 40-inch length.

What information is needed for a truck or bus wiper blade quotation?

Please provide the target vehicle or market, blade size, connector or arm details, order quantity, packaging preference, branding requirements, and any sample or inspection requirements.

Can private-label packaging be discussed?

Yes. Color-box artwork, labels, barcodes, product instructions, carton marks, and other private-label details can be discussed according to the selected blade, packaging structure, and order requirements.

Can buyers request a sample before a bulk order?

A sample-confirmation step is recommended for application, connector, construction, appearance, and packaging review. Sample availability and project details should be discussed with the sales team.

How should long wiper blades be packed for export?

The individual pack and outer carton should protect the long blade from avoidable bending and handling damage. Buyers should confirm inner packaging, units per carton, carton dimensions, markings, and shipping requirements before production.

Real workshop footage, component views, packaging examples, and defined inspection points give B2B buyers a practical picture of truck and bus wiper blade production. The next step is to match the blade specification, connector, packaging, and quality requirements to the intended commercial-vehicle program.